So I have the WTF chest ox along with the Blockade Runner Light and switch box, Aluminium Falcon Greeblies and also Klaus Windstrosser's cogs.
First things first after everything being trimmed, sanded back it was time to workout the layout.
I used masking tape to then start laying out all the placing.
Matt was awesome enough to provide me with the STL for light defuser boxes that allow the lighting from the LED's to spread over the entire area and thus giving a better result than placing them directly behind.
One of the issues I found was that the switch controller box sits too high if mounted directly to the chest box, pushing the switches way too high - I made a 5mm shim around the control bo that allowed the switches to sit perfectly on the facing of the chest box.
Also the assembly of the control box wasn't exactly perfect causing the switches to sit at a slight angle - this was corrected and then to prevent the switches difting I used leftover abs to create bays for each switch to sit in.
The kit also comes with 3D printed white trimming and to be honest its not really worth the bother and I cut my own from 0.2mm Tamiya Placard, backed it with double sided tape and then fixed in place.
With the difficult part done I now need to start looking at how to close the box up.
The plan is to use velcro on the front and back joins to hold them in place then using the cogs create another facing plate to cover the joins - the cogs then screw into place to hold everything down.
Once that's sorted I will then work on magnetising the back to fix to the chest plate.