SpaceMonkey

A small update but it's a start! My project has officially begun with the arrival of my SpecOps gloves and surplus scarf. Now that the updated Sean Fields files are out there I plan to start getting the printing of armour pieces arranged in the very near future.

Cheers for clarifying, I'll probably order a pair in the week. ??

Just given the site another look and they don't seem to have any 06A tubes - there's 6A and 06B tubes as well as a few others, though. Alternatively I was looking at @87ninefiveone's armour build and saw what appears to be standard GP5 40mm gas mask tubes used for the respirator. If this is the case I should be able to source a pair of these? https://www.epicmilitaria.com/original-black-gas-mask-hose.html Permitting that they receive new stock, of course! In the meantime I'll see if I can find anything locally is still an option as well.

Brilliant, thanks a bunch. I'll look around and see if I can find a pair in my size. Now to decide on the hoses - I checked Rubberfun after giving your build a look @JAFO, but unless I've been clueless and missed one (not out of the norm for me ?) I couldn't find anything similar to the dimensions given in the 501st CRL. I'm going to see what I can find, both locally and around the Internet.

Thanks for the welcome! Glad most of my selections so far have been good - and you're absolutely correct on the boots, seems I missed the "knee high" point on the CRL. My bad! ? Thanks for pointing out they're Soviet officer style too. Having gone back to the CRL, this looks more like a suitable boot. Would this be acceptable? https://www.ebay.co.uk/itm/Soviet-Russian-Chrome-Military-Uniform-Officer-PARADE-Leather-Boots-Size-42-Midd/353296350713?hash=item52421a7df9:g:gUsAAOSwbl9fwhzB If that's all good I'll have to find one in my size. ?

I haven't really been active here since joining as I haven't had anything to share, but now I'm beginning the search for parts to start my Mudtrooper armour project, as per the 501st CRL. I'll be using Sean Fields and Empire3D files for the armour pieces and the blaster, both of which will be kindly printed by a local prop builder before being given to me to assemble and paint; as you can see below, I'm starting to try and source everything else I'll need. There's still a a lot of gaps, but how does it look so far? Any suggestions, advice and tips to fill these gaps would be hugely appreciated! Helmet + greebles – Sean Fields print Goggles – Sean Fields print (straps TBD) Respirator – Sean Fields print (straps TBD) Hoses – https://rubberfun.nl/tubes-hoses/56-corrugated-hose-105-cm-40.html Scarf – https://www.ebay.co.uk/itm/Army-Scarf-Original-US-Military-Surplus-Hiking-Neck-Warmer-Combat-Wool-Scarves/174497879826?hash=item28a0e25712:g:kLwAAOSwHHxfmoI3 (ACQUIRED) Poncho/Palatka – TBD Tunic – TBD Collar piece - Empire 3D Free Upgrade for Sean's files Chest, shoulder, bicep armour – Empire 3D Free Upgrade for Sean's files Back armour and back boxes - Empire 3D Free Upgrade for Sean's files Gloves - https://www.ebay.co.uk/itm/HIGHLANDER-SPECIAL-OPS-TACTICAL-COMBAT-LEATHER-GLOVES-MILITARY-SHOOTING-BLACK-/271694261099 (ACQUIRED) Belt and buckle - https://www.etsy.com/listing/629221573/imperial-officer-belt-and-buckle-movie?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=imperial+officer+belt&ref=sr_gallery-1-3&organic_search_click=1&variation0=875757308 Belt boxes – Sean Fields additional downloads (included in Empire 3D Free Upgrade for Sean's files) Trousers – TBD Shins – Empire 3D Free Upgrade for Sean's files Boots – Soviet officer style, eg https://www.ebay.co.uk/itm/Soviet-Russian-Chrome-Military-Uniform-Officer-PARADE-Leather-Boots-Size-42-Midd/353296350713?hash=item52421a7df9:g:gUsAAOSwbl9fwhzB Ammo pouch - https://www.epicmilitaria.com/original-serbian-4-pocket-ammo-pouch.html E-10 Blaster – Sean Fields print, with Empire3D upgrade pack parts Grenade - 9412PropsAndArmory Unfortunately I don't have any current photos or progress to share just yet, but while I work on getting my body measurements recorded and sent to the aforementioned prop builder I may have the blaster parts printed in the meantime. Looking forward to sharing this build as it develops!