Jump to content

Grandmoshtarkin

Members
  • Posts

    20
  • Joined

  • Last visited

501st Info

  • Name
    Patrick

SpecOps Info

Profile Information

  • Location
    Charlotte, NC

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Grandmoshtarkin's Achievements

Apprentice

Apprentice (3/14)

  • Collaborator
  • Dedicated
  • Reacting Well
  • First Post
  • Conversation Starter

Recent Badges

11

Reputation

  1. Yeah, so the velcro on the boots appears to be sewn AND glued to them. I took apart the cover itself layer by layer and just resewed the velcro on it closer to the outer edge. Just take your time because it is a pain in the ass. 😂 But it looks and feels a lot better now. It looks like they used 1” strips on the underside of the covers, and 1.5” or so on the boots, which seems like a weird move in my opinion. And yeah, the tongue is just some scrap leather that I cleaned up and dyed before sewing on. Just made it about a 1/4” narrower than the top of the cover. My hope is it’ll help it stay tucked in under the shins and maybe add some coverage so the front of my legs take a little less abuse from the trimmed edge.
  2. 1ST UPDATE: ✓ Armor- 850 Armorworks Untrimmed but looks good overall. Have all of the details required in the CRL from what I can tell (with some cleanup to sharpen them) Will need to add groove on the bottom of the shins to make it Level 2 compliant, just need to track down better reference photos ✓ Helmet- 850 Armorworks Will need to reinforce some thin spots and do some serious detail cleanup around the cheek hoses, vents, sharp corners, etc. Had a friend print an accurate nose bridge with the 8th fin to make it Level 2 compliant NSM Monitor included to go for the specialist build, resin printed so hopefully not much cleanup there ✓ Boots- Keep Trooping Rebuilt the lace covers as they were sticking out WAY too much. Pulled the threads and moved the velcro closer to the edges, as well as added a leather tongue at the top to help keep it tucked under the shins. Undersuit- The Dark Side Closet In progress right now, due early September if my math is correct Accessories like the frag grenades and chest rig will probably be added later on or as a small side-project when I'm burnt out on trimming and prepping armor. Some photos of the changes to the boots: Before: The velcro was too far from the edge of the cover and stuck out almost horizontally unless I kept pushing it down. After: Sewing that spandexy material they used as a covering/edge tape is the worst thing ever. 10 outta 10- do not recommend doing.
  3. I figured as much, but figured I should confirm first before telling someone they're wrong. Especially if accuracy is the whole game here!
  4. Out of curiosity- someone on the 501st subreddit mentioned that blasters aren’t approvable with a trigger. This feels incorrect as there’s nothing in the CRLs, but can someone confirm? They’re referencing the scout trooper blaster so I’m wondering if it’s just for that style blaster?
  5. Honestly, I might go this route at first… I’m finding myself wanting detail and accuracy on the kit, and everything is adding up quickly. So I may hold off on submitting the E-11D for approval until I know I can do it the right way and get it looking perfect. I’ve got a galactic armory print, but recently discovered the Blaster Factory and those replica parts are looking too enticing.
  6. Not at all! The more the merrier, because chances are you’re going to ask something I wondered as well. 😂
  7. Somewhat off topic- but just want to shout out the CMD’s in here answering all these questions. Thank you!!
  8. Hey there! I’m still learning too, but I’m pretty sure it means that the LEDs must be included and work. Since Level 2 is striving for as close to screen-used as possible, they probably want to have all light options included and functioning to give it that more realistic appearance. However, I’ll let someone more knowledgeable jump in!
  9. Too late! 😂 One has been redone with velcro moved out towards the edges and reassembled, and the other is apart enough that I can start pulling stitching out of the velcro to move it further out. Honestly thinking about adding a longer leather tongue behind it to help it stay tucked under the shin armor. Pics to follow!
  10. Just got my boots in from Keep Trooping, and for the most part, they look good. The covers however don’t seem too well thought out/executed. The Velcro underneath is about an inch and some change from the edge of the cover on both sides, causing it to stick out pretty noticeably and show a lot of Velcro. Obviously no one will probably see it from down there and the shins might help keep it down- but I’m definitely about to take out some seams and see if I can sew it closer to the edge.
  11. Oh, trust me- I'll be investing in plenty of it. Also hitting legs harddd in the gym right now. 😅
  12. It’s here! Gave everything a quick rinse the tub to get the plastic dust and styrofoam pieces off. Overall everything is accounted for and looks good, but I will definitely have to trim a few pieces where I can to fit a little better. That or put on a few pounds…
  13. It’s actually out for delivery today with UPS so I will try and take a look when it gets here. It was pretty hard to tell with any real certainty in the photos on their site, but hoping it has it present. I just had a fear it’d be a completely flat piece so I wanted to prepare a few backup options just in case. I know I’ll at least need to mod the shin to add that lower groove if I want level 2 approval eventually.
  14. Hi all, in an effort to keep from flooding the forum with new topics every time I have a question, I’m hoping I might be able to get some eyes on this here. I ended up going with the Death Trooper kit and raw helmet from 850, and they will be here by the weekend most likely. (Impatiently watching the box make its way up a few states to me) I’ve already made plans to have some helmet pieces printed for better accuracy once I get the helmet and can measure for scaling, but wanted to get opinions on this hand plate. The file is from MCM_Design on Cults3d. I wanted to reach out and see if they might be willing to just sell me the hand plate file. With this having the appearance of some thickness and the recessed oblong shape along the front edge, would it be a safe guess to say this should be better suited than what will come with the kit?
  15. Absolutely appreciated! I guess I’m leaning towards the 850 helmet! I do have an accurate file as well and a friend with a printer, so I may have him print a new nose bridge as that one does appear to meet the Level 2 specs, including the 8th raised bar in the middle. The 8 side vents all appear to be there as well so I can definitely clean those out and back them as needed. Thank you!!
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.