TooTall

Jim Tripons undersuit is finally here. The top fits wonderful however the pants would definitely need some adjusting and taken in a bit but not alot. also around the neck its a little tight but not enough to choke me out. will that stretch out over time or can that be adjusted a bit? featuring my ss86 autobot blaster lol

gonna try my best to log everything in order. im slowly working more and more on the kit during the weekends as its my only availability right now. ive been sanding and filling this helmet the entire time. got the last round of sanding and hit it with black paint. some areas are needing to be fixed but that is completely okay. once i have all the pieces i need to be black i will hit everything with 2k gloss along with the help of a local star garrison friend. Jim notified me last night my undersuit was ready to be shipped so i paid off the rest and it is now on its way. very excited to get it done Up next. we finally, got the 850 kit in. now some things to address. i was unaware they were gonna trim some of it as a favor. at first glance i was very confused until they reached out a couple days later. not all of the pieces are PLA printed, it is all in fact resin, which means i would have to fully paint the entire armor set to match. the backplate they did do the hard part for me so i now have to clean it up entirely and fix a corner. i was missing a back side wing so i am being sent extras as we speak. the thigh connector parts were looking a little rough with the mold so i kind of left it alone for now until i work on it more. looking at it all was a bit overwhelming but yeah, i worked with what i got. Sunday was the 501st armor party. the host was great for giving advice on how to cut and trim excess materials. it took about almost 4 hours to cut everything as much as we can. next we're gonna have to clean up the rest we can with belt sander to get it all fine and trimmed and then we can glue everything together for assembly.

thank you chaos for this

I figured I try to get some biters. What is yalls helmet setup on the inside? Currently looking for fans, a battery and some padding. Asking around so I can get some ideas of when I fully paint my helmet.

This helps me out a ton thank you!

I figured I check here cuz I’ve been following your build with my 850 kit. Can you show me your thigh armor cuz I’m trying to figure out the little thigh connectors at the bottom to cut mine out and glue them

The blaster for death troopers is actually an E11-D. It’s a different build than the standard e11 the storm troopers have. not all of the DT is just regular black. The CRL has a paint guide and it’s all listed as gloss black with metallic black TS-40 and flat black on the helmet with weathered silver. The rest of the armor is gloss black

What brand of gloss black are you using. I plan on using 2k clear on my helmet since I have 2 cans and seeing that I have to paint my armor entire now.

After emailing 850 and having to put my foot down, i finally got the shipping notice that it’s on the way. Hopefully it’ll be here next time in time for the 501st armor party I’m attending

14 weeks later and nothing yet on my armor from 850. I’ve been told twice of 3 times already that the production will start soon or quote on quote next week. Other 850 users how long did it actually take to receive your armor. In any case I might have to issue for a refund and go for another source

Typing from my phone so no pics yet. I got my helmet through a 3d printing service and had it all printed in resin. Everything is sanded and smooth, I have to wet sand the helmet again to get rid of filler pooling and spray black on everything then I can get to work on 2k clear coat. I decided to order my blasters through imperial arms. It’s a premium version with a steel rod. still waiting on 850s armor and it raised some concerns to be I like to list -first off the back plate the backplate they changed to where it’s 2 separate parts. The base panel is all ABS while the big box itself is made of resin. I wonder why they went this direction instead of vac forming the entire thing. This means more work to sand and glue the entire box down and fill in the gap which will make it heavier - second is the thigh armor. The 2 rubber ribbed inserts are now an abs plastic instead of rubber to hold it together. It’s a weird move they went with so my alternative is to order rubber mats like Tenaz did in his build that’s pretty it with the armor from 850

Total he’ll ask for a 40 percent down payment to get you in the run. He sends you a pdf file over everything and you’ll see the price there

Yes he does accept PayPal. It’ll cost almost 400 plus shipping and you’ll pay the rest with shipping after he finishes it

Hi. I recently ordered mine from him and yes you will have to ask him on Facebook. In a PDF it’s labeled but yo can put down a 40% down payment and you’ll be in the queue. You’ll save money for it too.

Officially ordered Jim’s undersuit. Now we play the waiting game

back on again. still awaiting on armor i get too impatient sometimes lol. unfortunate new as my printers are down after printing my mcm E11D in PETG and i decided to switch up the helmet to mcm designs. i sent the files off to get printed in resin so hopefully in the next two weeks my helmet should be at my doorstep. it was gonna be easier to finish and paint and put together and i have my paints on the way as well. i might buy a fully finished SE14R just deciding who to pick it up from. other news i have my belt, pouches, gloves, holster, even a metal buckle and aluminum wrist mounts. oh as well as my 2 printed belt boxes once again thanks to doggydoc

Big news! We ordered Our armor through 850 armor works! As well as a belt, a holster, canvas pouches, and the leather rectangle pouch. I will be ordered the gloves in medium later Thank you doggy for providing the stls a few months ago I will be printing those pretty soon!

Looks like I was too late on getting my belt and metal buckle from plastic arms dealer as they’re no longer on his Etsy shop. Luckily phoenix props has the buckle and trooper bay has the belt. I have update yet and I haven’t ordered anything else. As much as I want to use my galactic armory helmet I think fitment with the visor bubbled lense is going be an issue. Will look out for another helmet. I saw jinta props with an unfinished kit, I might end up using that as it fits a 23 in circumference head

If I were to pick up an unfinished helmet kit from your shop what would be included with it so I know what else I would need

Those are cool! Are these for personal or seeking as kits?

Gonna talk to Jim sometime next week after paying bills about an undersuit and then after I come back from wondercon end of March I will place the order from 850 about the abs armor. Will be ordering new gloves soon from Endor finders and slowly order my belt parts!!

Hey thanks! I would greatly appreciate having the stl’s for them and that would finish mapping out the belt!! I’m writing your tip on the belt into my notes so I can try to put it in myself

I’ve been reading through the crls and I’ve mapped out everything for the belt. I was plastic arms dealer in on the list but crossed out. Is that still an approvable vendor? I have the holster, and the 3 small pouch set (6.75” x 2.75” x 1.25”), and the one leather pouch. I have not mapped out the 2 small square boxes. What exactly are those?

That was my bad on my end. I tried doing it from my phone and it said no lol

Got my visor today and some lights for the snout! I will have to heat form the visor to helmet and mod it cuz it has a holder for the visor which prevents the bubble lenses to fit https://imgur.com/a/l7X76ca