Kylorick[501st] Posted March 27, 2017 Share Posted March 27, 2017 Looking great mate. Your hand guards are really dull and forearms could be dropped down a bit and looks like you forgot neck seal. Link to comment
First0rder[501st] Posted March 27, 2017 Share Posted March 27, 2017 Ukswrath, your tutorials are amazing and without question, the best! ive had your TK ANH build bookmarked forever and used as reference. And now that you have one on SpecOps, just simply Amazing!!! Thanks again for your hard work and contributions! Andy Link to comment
ukswrath[TX] Posted March 27, 2017 Author Share Posted March 27, 2017 Looking great mate. Your hand guards are really dull and forearms could be dropped down a bit and looks like you forgot neck seal. Gloss up my hand guards - check Lower forearms - funny how the same setup looks stellar in white armor lol, check Neck seal - oops yes (got too excited), check Ukswrath, your tutorials are amazing and without question, the best! ive had your TK ANH build bookmarked forever and used as reference. And now that you have one on SpecOps, just simply Amazing!!! Thanks again for your hard work and contributions! Andy Thanks for the kudos Andrew. Link to comment
Darth Emphatic[CMD-DWM] Posted March 28, 2017 Share Posted March 28, 2017 Looking good. Congrats on submission and an awesome build that needs to be linked in the tutorial section. I'll make sure that happens. Link to comment
Darth Emphatic[CMD-DWM] Posted March 28, 2017 Share Posted March 28, 2017 I noticed that with a few pieces. Seems like more color disparity in the small pieces and the large. Like in the chest and the shoulder straps. Not the end of the world, but a little odd the kit is that way. At first, I just wondered if it was lighting. Link to comment
ukswrath[TX] Posted March 28, 2017 Author Share Posted March 28, 2017 Looking good. Congrats on submission and an awesome build that needs to be linked in the tutorial section. I'll make sure that happens. Thanks Steve, glad to be of assistance. I noticed that with a few pieces. Seems like more color disparity in the small pieces and the large. Like in the chest and the shoulder straps. Not the end of the world, but a little odd the kit is that way. At first, I just wondered if it was lighting. Yea it's really weird. When I use the flash certain plastic change color, without it they're identical. Either this is a different ABS type or something, I can't explain it. Link to comment
superbee[TX] Posted March 29, 2017 Share Posted March 29, 2017 Looks great ! Welcome to Family !!!!!:-) Link to comment
ukswrath[TX] Posted March 29, 2017 Author Share Posted March 29, 2017 Looks great ! Welcome to Family !!!!!:-) Thanks my friend, see you in the trenches Link to comment
usmc03[TX] Posted May 13, 2017 Share Posted May 13, 2017 Are you using rare earth magnets? If so, where do you get them? I am having trouble finding a good source. A little late to respond, but Home Depot sells them. I wipe them out each time I go lately. Sent from my iPhone using Tapatalk Link to comment
usmc03[TX] Posted May 14, 2017 Share Posted May 14, 2017 11. Thermal Detonator cont.... 11c. Assembly (using accurate screws). NOTE: As discussed in the "Helmet Update" section the machine screws used to secure the ears are incorrect for that application. The screws Anovos provided to attach the belt clips to the TD are also inaccurate however, the good news is the Anovos ear screws are a perfect match for the TD clips (Pan head and slotted). In this section we'll continue with the assembly. Starting with the TD Control Panel, apply and glue panel. Temporarily install end caps Install clips so the the edge mates against the end caps and the control panel. Afterwards using a sharpie or similar locate and mark the clip mounting holes. Measure mounting screw (I think they were 1/8") and drill holes in tube. Install clips as shown. Install end caps and paint screw heads if you haven't done so already. Finished Can I ask you what the length of the pipe was? I didn't see it. Also, the end caps, from open end to closed what is the dimensions? Thanks Sent from my iPhone using Tapatalk Link to comment
ukswrath[TX] Posted May 15, 2017 Author Share Posted May 15, 2017 Can I ask you what the length of the pipe was? I didn't see it. Also, the end caps, from open end to closed what is the dimensions? Thanks Sent from my iPhone using Tapatalk The overall tube (caps installed) is roughly 7-1/2". The reason I don't mention the tube length specifically is because your pre check measurements may differ slightly than mine. The important number is the overall length. "from open end to closed what is the dimensions?" Not quite sure what your asking me here. Tony Link to comment
usmc03[TX] Posted May 15, 2017 Share Posted May 15, 2017 The overall tube (caps installed) is roughly 7-1/2". The reason I don't mention the tube length specifically is because your pre check measurements may differ slightly than mine. The important number is the overall length. "from open end to closed what is the dimensions?" Not quite sure what your asking me here. Tony Thanks, I just needed something to go by. Sent from my iPhone using Tapatalk Link to comment
usmc03[TX] Posted May 15, 2017 Share Posted May 15, 2017 The overall tube (caps installed) is roughly 7-1/2". The reason I don't mention the tube length specifically is because your pre check measurements may differ slightly than mine. The important number is the overall length. "from open end to closed what is the dimensions?" Not quite sure what your asking me here. Tony I guess I should have posted this with question. I'm wondering how much to trim off? I have seen differing measurements for the end caps. Sent from my iPhone using Tapatalk Link to comment
ukswrath[TX] Posted May 15, 2017 Author Share Posted May 15, 2017 The easiest way is to install your caps first then take a full length measurement, minus 7-1/2" (190.5mm) from your total. Take that difference and cut the tube. Ex. Caps installed 8" (203mm), after the minus you have 1/2" (13mm) you need to cut off the tube. Hope this helps 1 Link to comment
First0rder[501st] Posted May 15, 2017 Share Posted May 15, 2017 Hey Tony, Just want to say thanks again as i was using your Anovos TK build guild as a reference this weekend to work on the thighs and calves. Link to comment
ukswrath[TX] Posted May 15, 2017 Author Share Posted May 15, 2017 Hey Tony, Just want to say thanks again as i was using your Anovos TK build guild as a reference this weekend to work on the thighs and calves. Hey Andrew, glad to be of assistance. Troopers Helping Troopers Link to comment
ukswrath[TX] Posted August 16, 2017 Author Share Posted August 16, 2017 Been a while since I posted but I'm about to submit for "Specialist" but before I do is there anything I need to change to meet requirements? Thanks for the help and advice. 501st submission photos - http://forum.specops501st.com/index.php?/topic/4272-ukswraths-anovos-tx-build/page__st__140__p__69527&do=findComment&comment=69527 Link to comment
Kylorick[501st] Posted August 16, 2017 Share Posted August 16, 2017 I think you will be fine. I followed your build and i know you know what your doing. Look foreword to reviewing your app trooper. 1 Link to comment
ukswrath[TX] Posted August 16, 2017 Author Share Posted August 16, 2017 Excellent and thank you for the kudos, I'll post it shortly Link to comment
First0rder[501st] Posted August 16, 2017 Share Posted August 16, 2017 OH YEAH!!! UKSWRATH Is going to apply for Specialist!!! Gonna Be nice!!!! Link to comment
ukswrath[TX] Posted August 16, 2017 Author Share Posted August 16, 2017 OH YEAH!!! UKSWRATH Is going to apply for Specialist!!! Gonna Be nice!!!! hahaha, Gonna make a minor change with my biceps first, my monkey arms make the armor look short lol. Bothers me whenever I look at the photos Link to comment
First0rder[501st] Posted August 20, 2017 Share Posted August 20, 2017 The anticipation is killing me ;0 your going to be a shoe in for sure Link to comment
ukswrath[TX] Posted August 21, 2017 Author Share Posted August 21, 2017 The anticipation is killing me ;0 your going to be a shoe in for sure My lower arm needed an adjustment. Sorry OCD kicked in lol Link to comment
mikidymac Posted September 14, 2017 Share Posted September 14, 2017 Thanks again Ukswrath for all you do. It has been some time since I have been on here but couldn't have done it without your classic TK build. I finished my wife's TX in November and she just finished her 5th official troop on Force Friday. Sent from my iPhone using Tapatalk 1 Link to comment
ukswrath[TX] Posted September 14, 2017 Author Share Posted September 14, 2017 Thank you for the kind words and my pleasure as always. Troopers Helping Troopers Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now