Dylan's DT build

[WARMACHINE[TX]]

I completely forgot to start my build thread in the spec ops forums, so here it is. (Mostly the same as build thread in knightfall forums)

 

 

Sent from my iPhone using Tapatalk

[WARMACHINE[TX]]

On the 23/5/2017 I received my armour kit along with the under suit from Jim Trippon.

 

 

Sent from my iPhone using Tapatalk

[WARMACHINE[TX]]

On the 24/5/2017 I noticed some small differences between Jim's armour kit and the one in the SRS.

 

 

 

 

 

Sent from my iPhone using Tapatalk

[WARMACHINE[TX]]

I have left the calf/ shin piece as it is, and I have been filling in the groove at the back of the helmet with fibreglass epoxy resin.

 

 

 

 

 

 

Sent from my iPhone using Tapatalk

[WARMACHINE[TX]]

On the 30/5/2017 I received my doc Martens boots (size 11) which I ordered from Amazon.

 

 

 

 

 

Sent from my iPhone using Tapatalk

[WARMACHINE[TX]]

On the 12/6/2017 I started on giving my SE-14R parts (Tom Campbell's kit) a coat of epoxy resin to save the amount of sanding required.

 

 

 

 

 

Sent from my iPhone using Tapatalk

[WARMACHINE[TX]]

It was around the 30/6/2017 when I received my 4X20 scope for the SE-14R which I had ordered off EBay.

 

I was I little worried at first, due to the condition that the box was in, but the scope seemed to be perfectly fine... until I had a look inside, and found that the horizontal cross hair had been broken.[emoji22][emoji35]

 

 

 

 

 

 

Sent from my iPhone using Tapatalk

[WARMACHINE[TX]]

By this time, I had sanded armour and taken the eye piece out of the helmet. Sorry, I didn't get any photos of the rest of the armour.[emoji53]

 

 

 

 

 

Sent from my iPhone using Tapatalk

[WARMACHINE[TX]]

On the 8/7/2017, I had a little accident, where I shut the garage door on the little ammunition box for the SE-14R. 🤦â€â™‚ï¸

 

 

 

 

 

 

Sent from my iPhone using Tapatalk

[WARMACHINE[TX]]

On the 13/7/2017 I ordered my pauldron from Trooperbay, and my MP40 shoulder pouch set from EBay.

 

 

 

 

 

Sent from my iPhone using Tapatalk

[WARMACHINE[TX]]

On the 16/7/2017 I started to glue the SE-14R parts together.

 

I was also, lucky enough to find the perfect spring, which is a 10mm diameter by 20mm spring, which I found out of an old broken nerf gun.[emoji1]

 

 

 

 

 

Sent from my iPhone using Tapatalk

[WARMACHINE[TX]]

On the 17/7/2017 I did a test fit of all the SE-14R parts, with the scope, and I was really happy with how things were looking. [emoji4]

 

 

 

 

 

Sent from my iPhone using Tapatalk

[WARMACHINE[TX]]

On the 20/7/2017 I received my MP40 pouch set.[emoji2]

 

I removed the small pouch, as the one that it was attached to had the loops for the strap positioned correctly.

 

But this resulted in the middle pouch missing one of the fastening loops on the front.

 

Also, the stitching was white, so I just went over it with a black sharpie.

 

Before (this is the other pouch):

 

After:

 

Lol, the light makes it still look a little white.

 

 

 

 

 

 

Sent from my iPhone using Tapatalk

[WARMACHINE[TX]]

On the 30/7/2017 I started giving the SE-14R parts and the shoulder bells a couple of coats of primer.

At this stage, up until now, I have been quite pleased with how they have turned out, as I have had terrible experiences in the past, when I tried spray painting.

 

For those wondering, the primer that I am using is Rustoleum flat grey.

 

 

 

 

 

Sent from my iPhone using Tapatalk

[WARMACHINE[TX]]

On the 3/8/2017, so just yesterday, I received my pauldron from Trooperbay.[emoji2]

 

 

I am very impressed and pleased with the quality of this pauldron, and even though I still have a tone of work to do, I can already start to feel things coming together. [emoji16]

 

 

 

 

 

Sent from my iPhone using Tapatalk

[WARMACHINE[TX]]

Just realised that I forgot to show images of the under suit, so here they are.

upper body (front):

 

Back:

 

Arm:

 

Pants:

 

I got my gloves from Endorfinders on Facebook.

 

Gloves:

 

 

 

 

 

Sent from my iPhone using Tapatalk

[WARMACHINE[TX]]

Thought I should show all of you guys a picture of me in my under suit. [emoji16]

Little bit hard so see all the details, but I'll get some more full body pics taken soon.

 

 

 

 

 

Sent from my iPhone using Tapatalk

[WARMACHINE[TX]]

Been sanding DLT-19X parts since 3:40 pm.

 

And I'm still going, at 8:26 pm. Haha.

 

 

 

 

 

Sent from my iPhone using Tapatalk

[WARMACHINE[TX]]

SE-14R is done, just need to go back over the little bits where the glue squeezed out.

 

Also, the little bit of metallic black/ gunmetal looking stuff on the trigger is graphite powder, which I used so that the trigger slides more smoothly.

 

 

 

 

 

Sent from my iPhone using Tapatalk

[WARMACHINE[TX]]

Finally decided to pack up for the night, haha, after 6hrs of sanding, and I'm still not finished. I went over the pieces with 40 grit sand paper, then went over again with 120 grit. I intend on going over them twice more, once with 240 grit, then finally 400 grit.

 

 

 

 

 

Sent from my iPhone using Tapatalk

[WARMACHINE[TX]]

And there we go. All up to date so far.😊

 

 

Sent from my iPhone using Tapatalk

[Woodo007[501st]]

Nice. Making great progress. Feel like I have spent my entire month sanding my dlt19x parts... so many of them😳

 

 

Sent from my iPhone using Tapatalk

[ukswrath[TX]]

Nice work Dylan

[First0rder[501st]]

Great build tread.. keep up the good work.

[Chaos[CMD-DCA]]

Awesome job Dylan. I too went with Jim's kit.

 

Sent you a PM