tgreen0626 Posted April 21, 2020 Share Posted April 21, 2020 OK so I have been very slow about this build. Been enjoying my TS ESB build. But I am now working on my TX and super excited. been doing a lot of trimming and that is also what has me bringing questions here. Do I still need to trim more? I am going to work on going for Specialist right out of the box, but I want to get this armor just right since our Garrison has no Shadow Scouts now that our one moved away Please let me know if I need to trim these down even more please. I know I have some sanding to smooth our edges and ensure rounding is proper. I feel like I still have a lot left compared to everyone else. Also this is a Walt's kit, I am pleased with it, and like I said it has a lot of trimming done and still to be done. https://imgur.com/a/ajuO5Ez I am looking for most feedback on the arm pieces. The bucket has a ways to go. Thanks Tom TS/DZ 62609 3 Link to comment
RAIDER[COTG] Posted April 21, 2020 Share Posted April 21, 2020 Welcome! Great to see you are working towards Specialist. The helmet will be difficult to tell till it's built but the chin looks like you could trim more off. As far as the arm pieces...yet the lower edges definitely look as if you could trim some more. Link to comment
tgreen0626 Posted April 21, 2020 Author Share Posted April 21, 2020 Thanks, the next question is, where do I find the 22mm bolts for the bucket. Mine came with much larger bolts. Thanks Tom Link to comment
RAIDER[COTG] Posted April 21, 2020 Share Posted April 21, 2020 3m speedglas bolts should do it (they're normally part of a welding helmet kit). for specialist you just need to make sure you get concave ones. Link to comment
tgreen0626 Posted April 24, 2020 Author Share Posted April 24, 2020 On 4/21/2020 at 10:58 AM, Raider said: 3m speedglas bolts should do it (they're normally part of a welding helmet kit). for specialist you just need to make sure you get concave ones. Did yours come with your kit? or did you get them someplace online? The ones with my kit are to large for Specialist. Link to comment
RAIDER[COTG] Posted April 24, 2020 Share Posted April 24, 2020 My kit (purchased from Chef's Creations) came with the bolts...but they are resin cast replicas that he does. Link to comment
tgreen0626 Posted April 28, 2020 Author Share Posted April 28, 2020 Some more work on the Scout this weekend. Lots of painting, trimming and now a lot of wet sanding to be done. Found a vendor for the 22mm bolts in the US but it is special order and they cannot order them for another month. https://imgur.com/a/ajuO5Ez Can someone give me some advice on the last couple of pics for the drop boxes. One of them looks decent and I was able to trim it up. The other to me looks like the pull of the ABS was not clean and I may need to get it replaced before I can trim it. If everyone thinks I can trim it ok, then please advise as I would rather get this all done and not have to go back to the vendor to get a drop box and wait. Thanks for the suggestions and help so far. I am very excited to get this done, approved, and then approved as a Specialist.!!! Link to comment
RAIDER[COTG] Posted April 28, 2020 Share Posted April 28, 2020 @tgreen0626 are you referring to the warping in the indentation? If so, I don't think that will be an issue because you will be cutting a slit in there and inserting a strap which will/should cover that area entirely. Can you provide the vendor info for the 22mm bolts? 1 Link to comment
tgreen0626 Posted April 28, 2020 Author Share Posted April 28, 2020 @Raider Here is that vendor: https://www.fairmontsupply.com/1105343/Product/Speedglas™ 051131-37141 Replacement Headband Mounting Hardware, For Use With Speedglas™ Utility Helmet Thanks for the update on the drop box, I will get to trimming that one and start initial painting and sanding. 1 Link to comment
RAIDER[COTG] Posted April 28, 2020 Share Posted April 28, 2020 6 hours ago, tgreen0626 said: Some more work on the Scout this weekend. Lots of painting, trimming and now a lot of wet sanding to be done. Found a vendor for the 22mm bolts in the US but it is special order and they cannot order them for another month. https://imgur.com/a/ajuO5Ez Can someone give me some advice on the last couple of pics for the drop boxes. One of them looks decent and I was able to trim it up. The other to me looks like the pull of the ABS was not clean and I may need to get it replaced before I can trim it. If everyone thinks I can trim it ok, then please advise as I would rather get this all done and not have to go back to the vendor to get a drop box and wait. Thanks for the suggestions and help so far. I am very excited to get this done, approved, and then approved as a Specialist.!!! Thx!!! Double check with vendor that the bolts are concave. I bought a pack similar to that and they werent. thonwith some dremel work u might be able to make the concave. Our recent Swamp Trooper crl model did something like that 2 Link to comment
tgreen0626 Posted May 7, 2020 Author Share Posted May 7, 2020 Did some more updates to the build thread on Imgur. Can someone advise if I trimmed to much on the knees. If I did, I can just print some or get some new ones, if not, then yeah for me as I was worried I just hacked them to much. Thanks Tom https://imgur.com/a/ajuO5Ez Link to comment
RAIDER[COTG] Posted May 7, 2020 Share Posted May 7, 2020 1 hour ago, tgreen0626 said: Did some more updates to the build thread on Imgur. Can someone advise if I trimmed to much on the knees. If I did, I can just print some or get some new ones, if not, then yeah for me as I was worried I just hacked them to much. Thanks Tom https://imgur.com/a/ajuO5Ez Knees should be fine. May want to strap those before painting (as you will need to rivet the upper straps in and the rivets will need to be black). Link to comment
tgreen0626 Posted May 7, 2020 Author Share Posted May 7, 2020 Thanks @Raider I will pull the strapping out and look at doing that this weekend then if I am still locked down and locked in. LOL.. I had to shift to my 3d printers e-11 and working on finishing that up. This Scout will have the holdout, e-11 and DLT-19 1 Link to comment
tgreen0626 Posted May 16, 2020 Author Share Posted May 16, 2020 Been working on the bucket. Any ideas on best things to finish those last gaps. The bondo feels like it just wants to crack and I have E6000 with some ABS on the inside seams to keep it. Just not certain on what else I can do to ensure the cracking does not happen and that the bucket will hold up. I am hoping to get to some priming on it soon but want it to be solid before I do that. Prep work is so worth it to make it right. Bucket update pics are the bottom 2 added. https://imgur.com/a/ajuO5Ez Link to comment
RAIDER[COTG] Posted May 16, 2020 Share Posted May 16, 2020 1 hour ago, tgreen0626 said: Been working on the bucket. Any ideas on best things to finish those last gaps. The bondo feels like it just wants to crack and I have E6000 with some ABS on the inside seams to keep it. Just not certain on what else I can do to ensure the cracking does not happen and that the bucket will hold up. I am hoping to get to some priming on it soon but want it to be solid before I do that. Prep work is so worth it to make it right. Bucket update pics are the bottom 2 added. https://imgur.com/a/ajuO5Ez My bucket (same type of split dome build)...I put abs strips inside as you BUT also fiberglassed the interior seam. then did the bondo on the exterior...and with that just be patient with the sanding and making sure its nice and smooth 1 Link to comment
tgreen0626 Posted May 17, 2020 Author Share Posted May 17, 2020 so sounds like maybe a little more bondo and then sand, primer, sand fill primer, sand, primer, oh did I say sand some more... Thanks. At least I know I am going in the right direction. 2 Link to comment
Blackwatch[CMD-DCA] Posted May 17, 2020 Share Posted May 17, 2020 Im considering picking one of my builds back up. How big is the WTF helmet compared to the Chef or Altmanns out of Australia? Link to comment
tgreen0626 Posted May 19, 2020 Author Share Posted May 19, 2020 On 5/16/2020 at 11:09 PM, Blackwatch said: Im considering picking one of my builds back up. How big is the WTF helmet compared to the Chef or Altmanns out of Australia? The WTF bucket is almost to tight on my head. I do not know about the others. I do have a rather large head though and I still fit the bucket. Link to comment
Blackwatch[CMD-DCA] Posted May 20, 2020 Share Posted May 20, 2020 Ok, thank you. I appreciate it. Link to comment
DarthSnark Posted January 5, 2021 Share Posted January 5, 2021 Older thread... and not sure if this is useful to anyone, but these helmet bolts were recommended on the pathfinders forum. https://www.amazon.com/Fibre-Metal-Honeywell-FM4001-Quick-Lok-Adapter/dp/B002BUMS8Y/ref=psdc_7491811011_t1_B015MG1SMK They are not black so you'd have to paint them, but they are concave if you prefer that look. Link to comment
tgreen0626 Posted September 16, 2021 Author Share Posted September 16, 2021 Hey all!!! Been a while but I moved from IL to NC and been grinding on my Scout lately. Hoping to somehow complete it in like 2 weeks!!! Big question, Clear coat? what brand, I used the Satin Canyon Black and I want to protect it, also did you put all the greeblies on first, build the bucket, etc, then clear coat. Or clear coat the raw painted, then assemble everything. Thanks again to all who posted a build thread, or helped with advice on my thread. The big challenge is the boots and making the vest etc next. Thankfully wife and I make a great team of seamstresses. Tom TS/DZ 62609 Link to comment
RAIDER[COTG] Posted September 16, 2021 Share Posted September 16, 2021 2 hours ago, tgreen0626 said: Hey all!!! Been a while but I moved from IL to NC and been grinding on my Scout lately. Hoping to somehow complete it in like 2 weeks!!! Big question, Clear coat? what brand, I used the Satin Canyon Black and I want to protect it, also did you put all the greeblies on first, build the bucket, etc, then clear coat. Or clear coat the raw painted, then assemble everything. Thanks again to all who posted a build thread, or helped with advice on my thread. The big challenge is the boots and making the vest etc next. Thankfully wife and I make a great team of seamstresses. Tom TS/DZ 62609 I used the same paint and then used a rustoleum satin clear coat. Its nice to be able to magic eraser off scuffs BUT the finish was a little more shiny then i wanted. Initially, I assembled armor then painted. Repainted multiple times over the years and just tape the straps inside the armor and tape off whatever else needs taping off and paint/coat. You can either put greeblies on and then tape off n paint or wait…main thing try n keep the greeblies matte black (unpainted) 2 Link to comment
tgreen0626 Posted October 17, 2021 Author Share Posted October 17, 2021 Making progress and I need to greatly update my pics. I just realized, I do not have the back clips for the TD. Where does everyone get them from? Thanks Tom Link to comment
RAIDER[COTG] Posted October 18, 2021 Share Posted October 18, 2021 12 hours ago, tgreen0626 said: Making progress and I need to greatly update my pics. I just realized, I do not have the back clips for the TD. Where does everyone get them from? Thanks Tom hey t…i unhid this post as it isnt fully complete to how we’d like to present in line w our other vendor lists yet…but scroll to the bottom… https://forum.specops501st.com/topic/8128-scout-trooper-parts-vendors/ 2 Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now