Pyro’s ISB Tactical Agent WIP

[pyro[TX]]

Here is what I have so far. I have alot of printing to do but once done this kit is going to look awesome!

Chest & Back armor- http://mudtrooper.co.uk/ (link broken) STL

Shoulder bells-NTX3D Shoretrooper STL  -printed 

Biceps- NTX3D Shoretrooper STL -printed

Gauntlets-Danny Chen -printed

Shins- http://mudtrooper.co.uk/ (link broken) STL

Top white belt-Belt to be made by me- ordered 

Buckle-Darman Props-ready for belt

Main belt boxes- Bailey builds designs

Secondary Belt boxes- Danny Chen - printed

Tunic & Pants- Jim Tripon - finished 

Boots- security trooper boots- finished

Boot Armor- Uknown

Gloves- Endor Finders-finished

Chest Comm add ons- CGSProps (Etsy) STL- printed

chest comm base- ready for paint 

[pyro[TX]]

I found the base for the chest comm and decided to order it instead of printing it. I have the add ons already printed aswell. 

 

for the second black belt. Is it leather or another material? 

Edit: It looks like the mud trooper belt but with different boxes? I’m not very familiar with the mud trooper so I might be mistaken 

and I am still researching the boots 

[pyro[TX]]

I’ve identified the gloves as the ones that the Shoretroopers use and I happened to own a pair so I have that and the hand plates printed. Also have the belt leather, the white dye (will be here tomorrow), the chest comm base (on order).  The comm add ons printed and the right shoulder currently printing. 

 

 

[Deamos]

Following your build but a quick question, looking at some hires screen caps the back plate looks to me to be more Shoretrooper than mud as it's missing a few nobbles above the recessed areas. Do you see the same or am I imagining it 🙂

Oh and awesome find on the radio files - waiting for my mic to turn up today.

[pyro[TX]]

I have both versions of the backplate so whatever looks correct I’ll print 

[Deamos]

Cool - Can't wait to see yours completed as I start my journey on this one.

[pyro[TX]]

Got my white leather dye in the mail today and my right shoulder has finished printing. It came out great!

[Deamos]

Quick question on your take on the white belt if you don't mind...

Is it just a belt or a wrap around band on top of a white short length Kama? Most of the guys look like they have the little "skirts" as part of that belt with the Imp buckle in the middle. Then the black belt over the top and drooping around the waist.

[pyro[TX]]

1 hour ago, Deamos said:

Quick question on your take on the white belt if you don't mind...

Is it just a belt or a wrap around band on top of a white short length Kama? Most of the guys look like they have the little "skirts" as part of that belt with the Imp buckle in the middle. Then the black belt over the top and drooping around the waist.

The white belt is exactly the same as an officers belt but it’s white instead of black. The Kama will be velcro to the inside of the white belt. The black belt looks to be a black stormtrooper belt with the belt boxes added to it.  

[pyro[TX]]

Ok I stand corrected, its not a shadow trooper belt. Its a blcak nylon belt.

 

How does this look for that belt? 
 

 

[Wompet[TX]]

1 hour ago, pyro said:

Ok I stand corrected, its not a shadow trooper belt. Its a blcak nylon belt.

 

How does this look for that belt? 

 

I’d have to rewatch those episodes, but I thought it looked like a white variant of Shoretrooper kit - armor (different forearms), belt, belt boxes, hip-plates.  Maybe take a look at those CRLs for belt ideas?

[pyro[TX]]

The shore belt is not the black belt, the shore belt is two belts sewed together and the pic it’s clearly one belt. 

[Tal Skirata[TX]]

The belt is actually a strip of ribbed rubber not nylon, the greebs are entirely new pieces, Kama is new, it doesn’t share any parts with the shoretrooper that I recall 

[Deamos]

I'm with Pyro on the Nylon as it looks more free flowing in the way it hangs and moves onscreen over a stiffer rubber, even if really thin.

Took a stab at prototyping the belt boxes too - tested on a 2" webbing belt to try and gauge the size of the belt.

 

[Tal Skirata[TX]]

I have hands on time with the real belts as I was a member of the costume department on both seasons of Andor, they’re a very thin rubber or rubber like material

[pyro[TX]]

Got both shoulders and and the front half of the left bicep printed, They back part should be done tonight then I'll start on the chest. I will be ordering a pre-dyed white leather belt and add the groves to it, since they dye job I was going to do failed.

[DarthBerry[501st]]

Nice work! I just finished off my first attempt at modeling the forearm, you can download it at the link below. If somebody takes the time to get high quality screenshots, I'd be happy to revise the file accordingly, but it looks pretty okay to me. I figured whoever would print it would want to glue on a functioning wrist flashlight (I think that's what's above the comm pad).

https://www.thingiverse.com/thing:7049441

Also, I don't think its exactly the shoretrooper bicep - its seems to me that it has an extra angle on the bottom, going from the middle "ridge" extending outwards on one half. One you find a good screenshot showing it, you can just use your Shore files in a slicer to print the extension. 

If you have some dimensions, I can design the boot armor and reverse belt buckle. 

[pyro[TX]]

6 hours ago, DarthBerry said:

Nice work! I just finished off my first attempt at modeling the forearm, you can download it at the link below. If somebody takes the time to get high quality screenshots, I'd be happy to revise the file accordingly, but it looks pretty okay to me. I figured whoever would print it would want to glue on a functioning wrist flashlight (I think that's what's above the comm pad).

https://www.thingiverse.com/thing:7049441

Also, I don't think its exactly the shoretrooper bicep - its seems to me that it has an extra angle on the bottom, going from the middle "ridge" extending outwards on one half. One you find a good screenshot showing it, you can just use your Shore files in a slicer to print the extension. 

If you have some dimensions, I can design the boot armor and reverse belt buckle. 

Heres a site with a ton of high res screen shots that should help
https://www.cap-that.com/starwars/andor/?seasontwo

[pyro[TX]]

Ok both sets of shoulders and biceps are done and I am ready to start printing the chest. I have also found the gauntlets , back belt box and the black belt boxes! Danny Chen on FB has modeled the pieces and I will be paying for them this friday and after he prints them he will ship them out to me. 

All thats left to print is the Chest, Back, shins and boot armor. Still need to figure out the kama part and the boots still.

 

[Deamos]

5 hours ago, pyro said:

Do you have a link or anything for Danny and those files? tried a quick FB search and got nowhere

 

 

 

 

 

[pyro[TX]]

He doesnt sell the files, he only sells prints. 

[pyro[TX]]

Was thinking of using this for the black belt. 

[Tarrif[TX]]

44 minutes ago, pyro said:

Was thinking of using this for the black belt. 

It looks good. Do you have a link to where we can buy it?

[pyro[TX]]

Here’s the link 

https://a.co/d/iRhaUTx

[pyro[TX]]

But I am betting that the final ruling will be the rubber belt as that’s more accurate to the show.