Diet Evils ISB Tactical

[Diet_Evil]

Hat: My Imp officer hat (Amazon special)

Chest Armor: TBC

Back Armor: TBC

Shoulder Bells:  Galactic Armoury

Biceps:  Galactic Armoury

Gauntlets: Galactic Armoury

Shins:

Boot Armor: Darthberry 3d Files

White Belt:

White Belt Buckle:

White Belt Boxes:

Black Tactical Belt: 2" Ribbed Rubber

Belt Boxes:

Belt Rear Box: Darthberry 3d Files

Tunic & Pants: TBC

Boots: German Jack Boots

Gloves:

Chest Radio: Found prop with mods

ISB Blaster: 3d print kit bash

[Diet_Evil]

So I'm going about this backwards from what many have done. I've printed and have files for most of the hard parts and I'll grab cloth when I'm closer to done with all those as I'm pretty much fully 3d printing the hard parts.

The backwards part is I'm diving into the blaster first as I'm a bit of a sci-fi weapons nerd and the prospect of having one of the first accurate ISB Tac blasters has me motivated. 

We already know the base is an MP40 (free files on cults3d for a mechanically moving mp40) and thanks to keen eyes on here we know the PDW stock used. We also know from Deamos's sources that the scope mount and barrel are custom. So with that knowledge I've dug into the screen caps for better images.

From screen grabs I'm gonna call it about 10 inches on overall barrel length based on its relation to the MP40 (roughly the distance from front of the magwell to the front of the trigger guard).


I'm going to use an e10 barrel I have file for as we can see it has the imperial blaster "ribs". It also happens to fit nicely over the mp40 prints chamber. 

We can also tell from screen shots that these aren't standard ribs like we see on the e11 e10 etc, they don't visibly curve into any holes in the heat shroud.

I think from looking at it we can assume the front sight shroud is the one off of the mp 40 cut down. The tip is custom from what we've heard.

Moving under after rewatching for my screen caps clearly it's a flashlight not a barrel, although I still think the mount near the end is the one off the barrel with the flashlight fitted in it so a thin pen light will be needed.

I intended to lengthen an existing 4x20 scope unless a found item can be ID'd by the time I get to it.

I know Deamos is working on a scope mount, so I'm going to see what he is able to come up with and work on a barrel cap and rails for the time being.

Edit: Id include more pics (I have so many more) but it seems I'm at my limit of potato sized images... not sure if someone could help me with that.

[Diet_Evil]

[pyro[TX]]

Just a heads up the Tactical hat is a different material then the standard Officer

[Diet_Evil]

1 hour ago, pyro said:

Just a heads up the Tactical hat is a different material then the standard Officer

Lol, you are vastly overestimating the quality of my hat. 
 

[pyro[TX]]

Quality has nothing to with it, it’s the wrong fabric. It’s a canvas type fabric instead of the suiting fabric.  

[Diet_Evil]

4 minutes ago, pyro said:

Quality has nothing to with it, it’s the wrong fabric. It’s a canvas type fabric instead of the suiting fabric.  

I mean, it does when the material is neither of those... regardless I'm not debating the accuracy of the hat I have on hand, that can change. I'm working on the blaster no ones completed yet.

[Diet_Evil]

First dip into CAD and I feel like Ive got a good approximation of a muzzle break based on the screen grabs.


The plug end fits into a 30mm internal diameter barrel shroud. I'll see about uploading the stl. Tomorrow I'll start working on the rails/ribs.

[Deamos]

I'm puzzled over the barrel at the moment as while i initially thought it looked like an E11 barrel there looks to be a lack of any holes on it in one screengrab.

In this one in the reference forum post you can just make out what look to be "loops" that look to be about 2" long and spaced down the length of the barrel. The connection points appear to be slightly raised from the surface as well. I've taken a stab at them and will print out what i think i "may" be talking about for a better visual representation.

 

@Diet_Evil The barrel done does look good and if you have used the same 3d MP40 files their is a modded set which corrects the inaccurate front sight to one with the genuine more rounded shroud

[TreeHuggerMatt]

is the muzzle tip the one from the dlt 20?

 

As for the mp40 files I have some but not sure if the right ones but says is full scale.  

 

Any files that we can make print would be great but im crap at CAD sorry

[Diet_Evil]

4 hours ago, Deamos said:

I'm puzzled over the barrel at the moment as while i initially thought it looked like an E11 barrel there looks to be a lack of any holes on it in one screengrab.

In this one in the reference forum post you can just make out what look to be "loops" that look to be about 2" long and spaced down the length of the barrel. The connection points appear to be slightly raised from the surface as well. I've taken a stab at them and will print out what i think i "may" be talking about for a better visual representation.

@Diet_Evil The barrel done does look good and if you have used the same 3d MP40 files their is a modded set which corrects the inaccurate front sight to one with the genuine more rounded shroud

Honestly with this pic if it has holes it's not as many as the e11 if any.

That said it gives us a very clear view of the rails. I'm going to fit them on the e10 barrel I have and if it looks off I'll go ahead and cover/fill/print without.

Honestly I'm not sure which mp40 file I got, I tend to hoard stl's and forget to source them, we'll keep comparing notes.

2 hours ago, TreeHuggerMatt said:

is the muzzle tip the one from the dlt 20?

 

As for the mp40 files I have some but not sure if the right ones but says is full scale.  

 

Any files that we can make print would be great but im crap at CAD sorry

The tips one I made in CAD, DLT-20 is close but with what we see it's not what they used.

I'll be providing links to all the bits I'm making (at least while we all figure this beast out) on thingiverse but I need to wait 24 hours before I can post as my accounts new.
 

[Diet_Evil]

Here's what Ive come up with for rails. Initially I was going to have the rail "skirt" go the full length of the rail just like current imperial blasters, but from the above picture it seems to just be at the ends. Ive gone ahead and printed both and mocked both up for comparison. from the photos we have its looking like six rows with space on the top and bottom for the front site and mount for the flashlight respectively.
 

After seeing them on the e10 barrel I think we can say with out a doubt its not e11 style. I've got a tube printing now with the one hole on the front we can see in the screen caps.