Kenyon

I most likely won’t sell the file anytime soon but if you don’t care about a resin cast I’m going to start selling 3D printed versions soon for much cheaper than the raw cast. My raw casts are $180 plus shipping including prewired LEDs and primed ready for paint. I am going to start selling the raw 3D prints for around $80 plus shipping soon. But definitely go with Chris the prop guys files as recommended….i forgot about his files and might actually go back and reprint my armor with his files.

I don’t know of any files out there that are perfect…. I know that in the files you have listed, the helmet is incorrect in almost all the details and the chest peice has several parts that are wrong, haven’t looked at the rest Yosh studios has a set that is closer than these files but they have to have work done to them as parts of the armor, like the legs is wrong (can’t recall which part at the moment) But Yosh studios helmet is also incorrect in several details you could definitely get a set of armor files and make them work (the helmet would be the hardest part as I haven’t seen a good set of files yet) I made the helmet for the CRL model and had to have a 3D model made as their just wasn’t a good helmet out their, but I don’t sell the files for the helmet currently. but I’m using Yosh studios files for my kit and I’m just fixing the parts post print.

Yeah I just sent you the link in a private message. Also me and Scott are still working on the mouth area so there’s going to be a V6 in the next couple of days with an updated mouth.

okay so I present to you guys my V5 Helmet! changes made: 1. center lines on the top of the helmet were adjusted per @tipperaryred pointing them out 2. upper greeblie in mouth area had the lower left square pushed in/indented and a small circle was added on the side of that same greeblie 3. greeblie above visor was added 4. outer edges of the ear caps were flattened 5. center area above teeth was changed to 1 center flat panel with a slightly angled panel on each side instead of the center piece being 1 slightly curved panel https://flic.kr/s/aHBqjAJZVR me and Scott are still kinda looking at the teeth to see if they need to be updated but they may be done

@Equuspolo and @batlord77 were the teeth in the helmet at an angle/slope down? or where they flat and just look angled here? Heres my reference photos where I'm seeing that, me and Scott are just trying to figure it out https://flic.kr/s/aHBqjAJXpd

I just sent a list of 5 more changes to be made to the helmet file so once I get a minute I’ll send everything that needs to be added!

We may have a new update that needs to be made. Me and Scott are working on it now. I’ll get something written up here in a moment when I get a chance.

I’ll take a look and see what I can do! Thanks for pointing that out.

So is there anything we’re waiting on to finish the helmet part of the CRL?

Hey Everyone, just got the V4 helmet model back from my designer and wanted to share it with you guys here and see if you saw anything else that needed to be changed. me and Scott have been working on what we think are the last changes....this included the bottom rectangle on the lower lip getting the inner line added and then the new brow piece above the visor with the angled edges! Let me know what you guys think https://flic.kr/s/aHBqjAJHur

Hey @Equuspolo so off topic a little bit but still on the guidelines of the helmet. In some pics the silver on the helmet looks matte and it other gloss. Would you say it was matte silver or more alumaluster silver like?

Here is the Flickr album with all the brow piece pictures. I also made a rough model that is no where near done, but just to outline the piece sorta. https://flic.kr/s/aHBqjAJAja

We still need to talk about the little rectangular piece above the visor, in the middle of the brow line. I’ve modeled up a 3-D model of what it looks like and I’ll send it over because it’s sort of hard to see in reference pics but I’ll do my best to find some that are clear. but I’ll send some more info when I get a chance I’m driving currently

wow really? none of us would have ever guessed that. so the double stacked led in the ear caps were both red? from the screenshots everyone thought that the top led in the ear cap was a different color. This is why its great to have you here helping!

yes the bottom LED is red and the top LED is orange/amber correct?

The LEDs in the ear caps on the helmet

Here he is guys! The man,The myth,The legend, Craig Gaylord! I would not have been able to know anything near what I know now without him. He’s a fantastic guy and answers whatever he can and is extremely nice about it. Thanks again Craig for helping out with all of this

So I just asked my friend who wore the purge helmet on set again if the top led was orange or white and he said and I quote “orange definitely not white, like blinker orange on you car” im trying to get him in here to talk about it possibly

The draft looks great, for the led what more backing info do you need to confirm it’s orangish yellow? If I get another guy that was on set to confirm it so that there’s two onset people confirming it will that work or does it need to be a photo? There’s a couple more things about the rectangle on the brow that need to be wrote in which is what Scott is speaking about but I or him need to figure out exactly how to say that because it’s a rectangle with the two bottoms corners flattened and pushed in with the sides angled out like wings sorta Thanks for pointing that out Scott, I’m looking at that with my designer now!

For the teeth I don’t thing the base should have an option of being metal mesh because you can clearly see in this picture of the screen used helmet that it’s solid plastic and painted silver with no metal mesh anywhere on the mouth https://flic.kr/s/aHBqjAJpBT

Hey! Glad to have you here helping, so the hot toys figure does have some inaccuracies in certain areas including that the nose area is supposed to be painted silver, also the half moon piece does sit on top and is not recessed per my on screen source

Yep, here is the link to the Flickr https://www.flickr.com/photos/198523406@N08/

Hey so while everyone is talking about the mouth area I have one sorta major side note to make, So my friend who got to wear the helmet on set let me know that the main mouth greeblies are actually on a main plate that was an insert into the mouth area and leaves a thin crevice line around the perimeter of the mouth plate between the greeblie plate and the main mouth wall you can see in the close up pic of the mouth from the screen used helmet the thin line around the main mouth plate and the other image is my file to try and show better the line updated with the Flickr link with all the photos showing this! https://flic.kr/ps/42qQVA

ill write these down and ask when I get the opportunity at the signing