sonfield[TX] Posted January 16, 2023 Share Posted January 16, 2023 Moderators, feel free to delete old or move here. WIP specs. Suit/ hat- Imperial boots Belt- Anovos Boxes- so far metal, but need to find the correct for resin printing Boots- Imperial Boots Gloves- RavelGloves Armor- so far, the latest files from Mudtrooper.uk Paint- Montana Anthracite, shock black, shock white, rust oleum matte clear, Testors Dull, alumaluster Dye Process- Dylon Olive Green Blaster/ Rifle: TBD Holster- will be made by me 3 Link to comment
Wasrovv Slociw Posted January 16, 2023 Share Posted January 16, 2023 How much Dylon for the dying process? Link to comment
sonfield[TX] Posted January 16, 2023 Author Share Posted January 16, 2023 One pack did it for me! Link to comment
Vanedor[501st] Posted January 17, 2023 Share Posted January 17, 2023 Thanks for sharing your work-in-progress with us, Justin! You have done a really great job. I really like your shoulder bell, in particular. The paint job seems really accurate. Good job with the dying of the costume. I hope mine is going to be as successful as your 🙂 As for the not-so-positive... The boots you have seem to be the tall jackboots from IB. When I compare them with the screenshots, they seem a little too high to me but that's probably no big deal. Another thing is that your gloves seem to have some decorative stitches. In the CRL we have been working on so far, it mentions that they shouldn't have any. With the belt boxes you already mention, it's the only things I have noticed Link to comment
Wasrovv Slociw Posted January 17, 2023 Share Posted January 17, 2023 24 minutes ago, Vanedor said: Thanks for sharing your work-in-progress with us, Justin! You have done a really great job. I really like your shoulder bell, in particular. The paint job seems really accurate. Good job with the dying of the costume. I hope mine is going to be as successful as your 🙂 As for the not-so-positive... The boots you have seem to be the tall jackboots from IB. When I compare them with the screenshots, they seem a little too high to me but that's probably no big deal. Another thing is that your gloves seem to have some decorative stitches. In the CRL we have been working on so far, it mentions that they shouldn't have any. With the belt boxes you already mention, it's the only things I have noticed Yeah he mentioned on the other thread that they weren't the accurate boots/gloves. Although for the boots I have seen a seller on Ebay have those boots. I bought them and they seem pretty accurate. Only small change would be to darken the stitching. 49 minutes ago, sonfield said: One pack did it for me! That's it? Did you use Soda Ash for the Fixator? 1 Link to comment
sonfield[TX] Posted January 17, 2023 Author Share Posted January 17, 2023 Yes. These are all “standing in” right now. also, I have the boots, just need to dig them out 😂😂. Gloves are on the way. Need to print some resin boxes for the belt. 2 Link to comment
sonfield[TX] Posted January 17, 2023 Author Share Posted January 17, 2023 18 hours ago, Wasrovv Slociw said: Yeah he mentioned on the other thread that they weren't the accurate boots/gloves. Although for the boots I have seen a seller on Ebay have those boots. I bought them and they seem pretty accurate. Only small change would be to darken the stitching. That's it? Did you use Soda Ash for the Fixator? I just did the instructions. There is about a half a cup of salt you add, but that is it. I do recommend keeping the temperature high though. that does seem to matter a bit Link to comment
neoakaj[TX] Posted January 17, 2023 Share Posted January 17, 2023 2 hours ago, sonfield said: I just did the instructions. There is about a half a cup of salt you add, but that is it. I do recommend keeping the temperature high though. that does seem to matter a bit So it’s just add the pack and salt to a washing machine on high temp and go? Sorry I have never done this before Link to comment
Wasrovv Slociw Posted January 18, 2023 Share Posted January 18, 2023 Oh yeah, this was the link that I found the boots: https://www.ebay.com/itm/225337326654?hash=item347726bc3e:g:0CQAAOSw-TFiDnsi Link to comment
sonfield[TX] Posted January 27, 2023 Author Share Posted January 27, 2023 Blaster assembled. Pre weathering, detail painting. Going to shorten and paint rails of course.. and add screws.. Link to comment
sonfield[TX] Posted January 27, 2023 Author Share Posted January 27, 2023 Some details: 4 Link to comment
Wasrovv Slociw Posted January 27, 2023 Share Posted January 27, 2023 2 hours ago, sonfield said: Damn mate! Where'd you get yours? Link to comment
sonfield[TX] Posted January 28, 2023 Author Share Posted January 28, 2023 Chris Bostock. I believe it is his remix of Seans file. I made this as a test print. Believe a final will be released on thingiverse. 1 Link to comment
Wasrovv Slociw Posted January 28, 2023 Share Posted January 28, 2023 9 hours ago, sonfield said: Chris Bostock. I believe it is his remix of Seans file. I made this as a test print. Believe a final will be released on thingiverse. Is it PLA or PETG? Link to comment
sonfield[TX] Posted January 28, 2023 Author Share Posted January 28, 2023 Printed this in resin 1 Link to comment
Wasrovv Slociw Posted January 28, 2023 Share Posted January 28, 2023 1 hour ago, sonfield said: Printed this in resin Dude badass. Link to comment
sonfield[TX] Posted January 28, 2023 Author Share Posted January 28, 2023 Appreciate it!! Link to comment
sonfield[TX] Posted January 29, 2023 Author Share Posted January 29, 2023 Got a good ways yesterday. Here is a quick pan around. Silvering the buckle inserts shortly. Screen grabs from video as well. Link to comment
sonfield[TX] Posted January 29, 2023 Author Share Posted January 29, 2023 Ok. Done for now until someone says something is wrong! I am going to suit up shortly and post those pice. But here are all of my components. Enjoy and feel free to ask any questions. 2 Link to comment
sonfield[TX] Posted January 30, 2023 Author Share Posted January 30, 2023 suited up 6 Link to comment
Blackwatch[CMD-DCA] Posted February 22, 2023 Share Posted February 22, 2023 wow , this is so good to see!!! We are gtting close to having CRL models! Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now