CRL Update Discussion - Purge Trooper Phase I: Electrostaff Specialist

[IcyTrooper[CMD-DL]]

Yeah L2 is definitely good for the finer details on this and we can even through reference images into the Gallery like I had mentioned and planned on to assist us and the GMLs. I'm planning on reviewing this tomorrow to push through. My brain is fried after helping get the rest of those trading cards done and work today. I know that we have a lot of the images already in a Google Drive folder and are edited, so we are in really good shape.

[TK 21814[TX]]

Let me know if you need any more reference pics. I can get you anything you need. I look forward to seeing the CRL updated. Will the CRL be updated with my costume?

[IcyTrooper[CMD-DL]]

4 hours ago, TK 21814 said:

Let me know if you need any more reference pics. I can get you anything you need. I look forward to seeing the CRL updated. Will the CRL be updated with my costume?

Yep you will be the CRL model for it, so as long as we have pictures that cover every part that is in the CRL and have the main front/back pic we are set. I'm a little behind on wrapping up review of that Electrostaff, but I'm skipping out on something tonight so that I can go through the text once more and post it for us. Once we verify we have pictures for everything that is in the CRL I can request a CRL unlock and we can start putting it in there.

[TK 21814[TX]]

Please don’t skip real life fun for the sake of this CRL! It can wait. 👍

[IcyTrooper[CMD-DL]]

Thankssssssssss  

I have updated the text for the Electrostaff now. I think since it is a weapon we can be a little more lenient on it:

Electrostaff

• Please also reference the gallery images when reviewing the text below.
• Electrostaff is approximately 84 inches (213.3cm) long and divided into five sections.
  • Sections 1 and 2 are the ends of the electrostaff.
    • Sections 1 and 2 may have the appearance of electricity emitting from it via the use of greeblies. If these greeblies exist they must be painted to match the reference photos or may be electronically lit matching the color of the reference photos.
  • Sections 3 and 4 are the grip handles of the electrostaff.
  • Section 5 is the middle section of the electrostaff.
• Sections 1 and 2 are approximately 16.5 inches (42cm) and have the following details:
  • A prong-like tab greeblie with raised ends that has 2 circles removed in the middle of the raised part of the greeblie. This is located on the butt end of the electrostaff.
  • The butt end of the electrostaff is a circular tube segment with circular indentions evenly spaced near the end of the segment. This segment is attached to the next segment via a thread-like connection.
    • The butt end of the electrostaff has an inner depressed ring with 4 circular indentions evenly spaced around the outer edge of that inner depressed ring.
  • The next segment from the thread-like connection resembles the shape of a bullet with a flat end as it connects to another cylindrical segment and has a ringed connector piece which connections sections 1 and 3 to sections 2 and 4.
• Sections 3 and 4 are approximately 14 inches (36cm) and have the following details:
  • The outermost connection that connect to sections 1 and 5 resemble that of section 5 in design. It is ribbed with 4 evenly spaced, circular rods that run the length of the connection.
  • The innermost connection that connections section 5 also resemble that of section 5 in design. It is ribbed with 4 evenly spaced, circular rods that run the length of the connection.
  • The middle part is textured resembling a grip around the entire length of the section.
    • Both of the textured sections will have a circular button with a ring as if it was used to turn on the electrostaff. This button does not need to be functional and may sit on a beveled base.
• Section 5 is approximately 35 inches (88.9cm) long and has the following details:
  • The middle section of the staff is ribbed.
  • There are 4 evenly spaced, circular rods that run the length of the middle section.

OPTIONAL Level two certification (if applicable):

• Sections 1 and 2:
  • In addition to the 4 circular indentions that are evenly spaced around the outer edge of the depressed inner ring, there are an additional 4 circular indentions that are on each side of the prong-like greeblie within the inside of the inner ring matching the reference photo.
  • These sections must have the appearance of electricity emitting from it via the use of greeblies. They must be electronically lit matching the color of the reference photos.
• Section 5:
  • Where ribbed sections come together there are 2 circular indentions on each side of the raised connection. These are only on 2 of 4 sides in between the circular rods, each on opposite sides.

[tipperaryred[CMD-DCA]]

On 2/9/2024 at 3:36 AM, IcyTrooper said:

Thankssssssssss  

I have updated the text for the Electrostaff now. I think since it is a weapon we can be a little more lenient on it:

Electrostaff

• Please also reference the gallery images when reviewing the text below.
• Electrostaff is approximately 84 inches (213.3cm) long and divided into five sections.
  • Sections 1 and 2 are the ends of the electrostaff.
    • Sections 1 and 2 may have the appearance of electricity emitting from it via the use of greeblies. If these greeblies exist they must be painted to match the reference photos or may be electronically lit matching the color of the reference photos.
  • Sections 3 and 4 are the grip handles of the electrostaff.
  • Section 5 is the middle section of the electrostaff.
• Sections 1 and 2 are approximately 16.5 inches (42cm) and have the following details:
  • A prong-like tab greeblie with raised ends that has 2 circles removed in the middle of the raised part of the greeblie. This is located on the butt end of the electrostaff.
  • The butt end of the electrostaff is a circular tube segment with circular indentions evenly spaced near the end of the segment. This segment is attached to the next segment via a thread-like connection.
    • The butt end of the electrostaff has an inner depressed ring with 4 circular indentions evenly spaced around the outer edge of that inner depressed ring.
  • The next segment from the thread-like connection resembles the shape of a bullet with a flat end as it connects to another cylindrical segment and has a ringed connector piece which connections sections 1 and 3 to sections 2 and 4.
• Sections 3 and 4 are approximately 14 inches (36cm) and have the following details:
  • The outermost connection that connect to sections 1 and 5 resemble that of section 5 in design. It is ribbed with 4 evenly spaced, circular rods that run the length of the connection.
  • The innermost connection that connections section 5 also resemble that of section 5 in design. It is ribbed with 4 evenly spaced, circular rods that run the length of the connection.
  • The middle part is textured resembling a grip around the entire length of the section.
    • Both of the textured sections will have a circular button with a ring as if it was used to turn on the electrostaff. This button does not need to be functional and may sit on a beveled base.
• Section 5 is approximately 35 inches (88.9cm) long and has the following details:
  • The middle section of the staff is ribbed.
  • There are 4 evenly spaced, circular rods that run the length of the middle section.

OPTIONAL Level two certification (if applicable):

• Sections 1 and 2:
  • In addition to the 4 circular indentions that are evenly spaced around the outer edge of the depressed inner ring, there are an additional 4 circular indentions that are on each side of the prong-like greeblie within the inside of the inner ring matching the reference photo.
  • These sections must have the appearance of electricity emitting from it via the use of greeblies. They must be electronically lit matching the color of the reference photos.
• Section 5:
  • Where ribbed sections come together there are 2 circular indentions on each side of the raised connection. These are only on 2 of 4 sides in between the circular rods, each on opposite sides.

Superb!  Is that the full text for the CRL now finalised?

[IcyTrooper[CMD-DL]]

Yeah I think we are going to be set to start putting the stuff into the CRL wiki. I've been doing Photoshop cutting of the images in the folder we have for this costume so that we have the images ready for upload and insertion. I need to get a few of you CRL editing accounts, but with the elections right now that is on hold. Most of the photos were already cut out and made for the CRL which was good, but there were a few that were missing. Either way we are in a good spot! The photos we have had are excellent quality.

[tipperaryred[CMD-DCA]]

On 2/10/2024 at 10:40 PM, IcyTrooper said:

Yeah I think we are going to be set to start putting the stuff into the CRL wiki. I've been doing Photoshop cutting of the images in the folder we have for this costume so that we have the images ready for upload and insertion. I need to get a few of you CRL editing accounts, but with the elections right now that is on hold. Most of the photos were already cut out and made for the CRL which was good, but there were a few that were missing. Either way we are in a good spot! The photos we have had are excellent quality.

I did get a DM last year on the main Legion boards which I only recently realised was someone setting me up with that exact thing.  So I was able to log in and change the default password, and once I know the basics I should hopefully be able to help there.

[IcyTrooper[CMD-DL]]

@TK 21814 we are about done with the CRL image making for this. Do you have the undersuit and shoulder bib you can upload to that Google Drive we provided in the past?

[TK 21814[TX]]

Hey IcyTrooper, I have uploaded fresh images of the undersuit pieces and of my electrostaff. The undersuit has had final hemming completed and vent panels installed. The electrostaff now has LED lighting for the purple electricity.  

[TK 21814[TX]]

Let me know if the resolution is acceptable on those pics. I forgot I actually have a camera that has higher resolution. LMK. 🤪

[IcyTrooper[CMD-DL]]

On 3/1/2024 at 7:20 PM, TK 21814 said:

Let me know if the resolution is acceptable on those pics. I forgot I actually have a camera that has higher resolution. LMK. 🤪

From what I can see they look good! Could you get one of the gloves without the armor on it as well?

I just realized we need that as well. Then we are set! I'm going to request that the CRL gets unlocked either this evening or tomorrow so that we can get the text and images updated.

For the front and back images at the top we list the TX number and photographer. It'll be TX-21814 and not sure who you want as the photographer name?

[TK 21814[TX]]

Glove pictures uploaded. Photographers are Melissa and Brad Davies

[tipperaryred[CMD-DCA]]

Superb effort all, it'll be great to see the updates go live after all this work.

[IcyTrooper[CMD-DL]]

We have requested the CRL unlock and will be working on getting it updated when the LMOs open it. We'll probably have some training session going on with this with newer DCAs as well, so that they learn how to update the Wiki.

I'll post here again when it is fully updated!

[IcyTrooper[CMD-DL]]

@TK 21814 are you able to upload a picture of the abdomen armor into the Google Drive? The CRL wiki is getting updated and I realized that we actually don't have that one. We have everything else though. 

[TK 21814[TX]]

Uploaded 3 pics. My ab armor and kidney armor are one piece. 

[IcyTrooper[CMD-DL]]

The CRL has been updated with both next text and new pictures. It may take a bit for the servers to refresh the cache and propagate across the internet.

Well done @TK 21814!!!

[tipperaryred[CMD-DCA]]

Superb.  Next stop, Purge Commander 😉

 

[TK 21814[TX]]

Thank you team for the hard work on this CRL rebuild! I'm very proud of my kit and contribution to this CRL. It's been a pleasure!