-
Posts
243 -
Joined
-
Last visited
-
Days Won
15
Content Type
Profiles
Forums
Events
Everything posted by gmrhodes13
-
Sith Trooper Helmet Auction Julien's Auctions https://www.juliensauctions.com/en/items/100810/star-wars-the-rise-of-skywalker-sith-trooper-helmet Estimate $10,000 - $20,000 Sold Price $22,750 An original helmet as worn by a Sith Trooper in the J.J. Abrams film Star Wars: Episode IX - The Rise of Skywalker (Lucasfilm Ltd., 2019). This helmet is composed of resin and plastic with a 3D-printed internal frame with an external plastic shell. The number "41" is written in black marker on the inner edge. Tape residue and adhesive padding are present along the bottom edge of the interior. A 3-D printed black nose, mouth and eye panel is attached to the helmet by a series of screws. See-through and tinted lenses are present. This type of helmet is worn by the Sith Troopers, the elite force of red Stormtroopers-like soldiers introduced as part of Emperor Palpatine's (Ian McDiarmid) Final Order. Accompanied by a Letter of Authenticity from Lucasfilm Ltd., signed by Executive Vice President and General Manager Lynwen Brennan. The Letter of Authenticity states, "This letter certifies that the accompanying item is 100% genuine as certified by Lucasfilm; Summary: This Sith Trooper helmet is an original prop from the Star Wars: The Rise of Skywalker (2019) production. It was made by Lucasfilm production artists at Pinewood Studios in the United Kingdom in 2018."
-
Came out great, nice work
-
Very nice looking finish on the paint
-
New CRL Proposal - Sith Trooper (TROS)
gmrhodes13 replied to RAIDER's topic in First Order Sith Trooper
I've not heard anything, as far as I know there is still some tweaking going on -
I used to be the same, so many projects going at once, I've slowed down these days, a few medical issues so I normally don't take on too much, 1 big project at one time
-
Thanks for the kind words. I'm not sure what the situation is with covid in Jim's area, you could contact him via FB and see if he is still taking orders at this time. You can order longer legs which is what I did, the fit is great and I trimmed some off as they were just a little too long. I have extra room around the ab too which I added some padding. An enjoyable build as I never worked with flexible fibreglass before. Hope to see a build thread from you soon.
-
You can use a Philips head screwdriver first, with a slight tap it will split the post so when you next use the snap tool it will spread the post more than just using the tool on it's own. Looking good.
-
New CRL Proposal - Sith Trooper (TROS)
gmrhodes13 replied to RAIDER's topic in First Order Sith Trooper
Nice work, I agree the 7 and 8th segments should be optional at this stage with no screen references available. -
I used elastic for most of the parts with snaps. Harness is made from nylon. Vecro for spats.
-
They were not on the first kits and had been updated, your image is small but looks like you have the updated pieces. Although Jim added the lines they are in the wrong spot, you could fill and re-cut, they should be lower and overlap the other lines by 4 Squared off side shin box and added details Neck lip update Shin magnet closure showing how much material was left after trimming.
-
I didn't cut any parts to make shorter BUT I did trim off some material from the sides on the shins and thighs they are just too wide. I used magnets on the insides of the shins so they lock in nicely. Make sure you try with boots on or you may trim too much and they won't go around the boot fully
-
If you can get it on and off then it should be ok, after all approval photos will show you wearing not separate pieces
-
Hello and welcome back, sorry to hear you had issues with Anovos, many have been in the same boat. I also have a Jim kit and have had to make some adjustments to it (you can find my build here), there are some details missing from his kit as it was produced early on. The CRL is almost ready so that should help your build. Good luck and looking forward to seeing more.
-
New CRL Proposal - Sith Trooper (TROS)
gmrhodes13 replied to RAIDER's topic in First Order Sith Trooper
I wouldn't really think there would be a lot of objections to using 1/16th's, I don't think many GML's will get out a ruler when checking applications ? -
Looking forward to the progress, I added similar updates to my kit, also a few others
-
New CRL Proposal - Sith Trooper (TROS)
gmrhodes13 replied to RAIDER's topic in First Order Sith Trooper
SPATS perhaps Are fitted over the base of the shin Rest looks ok -
New CRL Proposal - Sith Trooper (TROS)
gmrhodes13 replied to RAIDER's topic in First Order Sith Trooper
Looks good here -
New CRL Proposal - Sith Trooper (TROS)
gmrhodes13 replied to RAIDER's topic in First Order Sith Trooper
All looks good. -
New CRL Proposal - Sith Trooper (TROS)
gmrhodes13 replied to RAIDER's topic in First Order Sith Trooper
Looks good. Not sure about the chocolate bars terminology. -
Neck Seal Gaskets shall be ribbed and made of rubber or a shiny black material Ribs stop at the base of the neck and turns into a smooth section forming the rest of the neckline Conceals the wearer's neck Zip at the back front Neck seal zip is on the front not the back. This was also confirmed by someone who worked on set who posted in the Sithtrooper FB group
-
New CRL Proposal - Sith Trooper (TROS)
gmrhodes13 replied to RAIDER's topic in First Order Sith Trooper
Now you've got me, I don't work in inch decimals only fractions, someone else will have to check