Rat[501st] Posted November 23, 2019 Author Share Posted November 23, 2019 Photo update, I got some frosting on my ab buttons but I can clean that up easily. 1 Link to comment
RAIDER[COTG] Posted November 25, 2019 Share Posted November 25, 2019 Looking good and looking forward to the strapping. I always like to see the setups people do there. 1 Link to comment
Rat[501st] Posted November 25, 2019 Author Share Posted November 25, 2019 2 minutes ago, Raider said: Looking good and looking forward to the strapping. I always like to see the setups people do there. Thanks David. Yeah I've just started gluing parts since I've been busy with a commission build. Bucket is almost done just need to do the lenses and fans. I'm thinking of doing nylon webbing for my strapping. 1 Link to comment
IcyTrooper[CMD-DL] Posted November 26, 2019 Share Posted November 26, 2019 Rocking and rolling! I did see your Facebook post about weathering. I didn't see that one in the CRL, so wanted to pass along just in case. 1 Link to comment
Rat[501st] Posted November 26, 2019 Author Share Posted November 26, 2019 2 minutes ago, IcyTrooper said: Rocking and rolling! I did see your Facebook post about weathering. I didn't see that one in the CRL, so wanted to pass along just in case. Yeah I'll double check it but I'm pretty sure that is what is stated for the weathering. Link to comment
Rat[501st] Posted November 26, 2019 Author Share Posted November 26, 2019 17 hours ago, Raider said: So I just realized I need to repaint my ab buttons. I just noticed that I've inverted the colors. Link to comment
RAIDER[COTG] Posted November 26, 2019 Share Posted November 26, 2019 9 hours ago, Rat said: Yeah I'll double check it but I'm pretty sure that is what is stated for the weathering. There shouldnt be any mention of weathering in the current CRL nor the update proposal (which prob wont go live till after Dec) Link to comment
Rat[501st] Posted November 26, 2019 Author Share Posted November 26, 2019 3 minutes ago, Raider said: There shouldnt be any mention of weathering in the current CRL nor the update proposal (which prob wont go live till after Dec) Yeah after reviewing I realized there wasn't. Now I'm confused as to where I saw that. Link to comment
RAIDER[COTG] Posted November 26, 2019 Share Posted November 26, 2019 15 minutes ago, Rat said: Yeah after reviewing I realized there wasn't. Now I'm confused as to where I saw that. Not sure. I checked Specialist text (which is being moved into the CRl w update) and dont see it there. Text calls for a consistent gloss red. Thats about it. Magmas (misnamed?) are essentially Royal Stormtroopers. Id imagine they would be pristine like their Royal Guard cousins. Question...are you going for base approval or Specialist? If Specialist, I recommend going by the incoming proposal. 1 Link to comment
Rat[501st] Posted November 26, 2019 Author Share Posted November 26, 2019 1 minute ago, Raider said: Not sure. I checked Specialist text (which is being moved into the CRl w update) and dont see it there. Text calls for a consistent gloss red. Thats about it. Magmas (misnamed?) are essentially Royal Stormtroopers. Id imagine they would be pristine like their Royal Guard cousins. Question...are you going for base approval or Specialist? If Specialist, I recommend going by the incoming proposal. I'm hoping for specialist approval. But not sure I'll be able to get it. I'm building for it though. 1 Link to comment
Rat[501st] Posted November 27, 2019 Author Share Posted November 27, 2019 So glossy and shiny it will be. Especially if the renaming goes through with the pending poll, sadly I may not be able to vote on it. That is depending on where it gets posted. Link to comment
Devolver[501st] Posted November 27, 2019 Share Posted November 27, 2019 Oh man, I hope this kit gets renamed. Crimson Stormtrooper or Royal Stormtrooper sounds so much cooler and we know it's not really a "Magma Trooper" since Battlefront came out. 1 Link to comment
Rat[501st] Posted November 27, 2019 Author Share Posted November 27, 2019 (edited) 1 hour ago, Devolver said: Oh man, I hope this kit gets renamed. Crimson Stormtrooper or Royal Stormtrooper sounds so much cooler and we know it's not really a "Magma Trooper" since Battlefront came out. Yeah I'm all for the name change to the Royal Stormtrooper. Edited November 27, 2019 by Rat Spelling correction Link to comment
Rat[501st] Posted December 7, 2019 Author Share Posted December 7, 2019 So more gluing on the body. Link to comment
Rat[501st] Posted December 7, 2019 Author Share Posted December 7, 2019 So went and upgraded the paint and went with a black frown. Talk about menace, this should be the standard. I also got the ab buttons squared way 2 Link to comment
RAIDER[COTG] Posted December 7, 2019 Share Posted December 7, 2019 The black frown is cleeeeeeean!!! 1 Link to comment
Allan1313[MBO-CMD] Posted December 7, 2019 Share Posted December 7, 2019 The black frown looks good! 1 Link to comment
Rat[501st] Posted December 7, 2019 Author Share Posted December 7, 2019 1 hour ago, Raider said: The black frown is cleeeeeeean!!! Thanks David. 1 hour ago, Allan1313 said: The black frown looks good! Yeah I like it much, much better with the black. The black frown just brings out the menace factor. Link to comment
Rat[501st] Posted December 8, 2019 Author Share Posted December 8, 2019 (edited) Duplicate post. Edited December 8, 2019 by Rat Duplicate post Link to comment
Rat[501st] Posted December 10, 2019 Author Share Posted December 10, 2019 So finishing up the thighs and halfway through the forearms. Retrimmed the ab button box. Getting to the final construction. 1 Link to comment
RAIDER[COTG] Posted December 10, 2019 Share Posted December 10, 2019 Were you able to find black tube stripe decals? I'm sure you could contact Trooperbay and ask them to do them in black. When I've ordered shadow scout decals, he normally prints them in matte...but has done them up in gloss for me when I've requested it. Link to comment
Rat[501st] Posted December 10, 2019 Author Share Posted December 10, 2019 46 minutes ago, Raider said: Were you able to find black tube stripe decals? I'm sure you could contact Trooperbay and ask them to do them in black. When I've ordered shadow scout decals, he normally prints them in matte...but has done them up in gloss for me when I've requested it. Yeah I came across a guy up in Canada that is shipping some to me today. 1 Link to comment
Rat[501st] Posted December 10, 2019 Author Share Posted December 10, 2019 Another question would duck cloth be acceptable for the belt? Link to comment
Blackwatch[CMD-DCA] Posted December 10, 2019 Share Posted December 10, 2019 Rat I went back to the original (red) magma trooper CRL and it says red duck cloth. I have to imaging you are goign to need to dye or paint it, but check the other WIPs here to see what they did. Per the original CRL you can use red canvas. Canvas and duck cloth are SIMILAR but not quite the same. That may be a GML call. Belt Belt face is made of plastic (ammo belt). It is comprised of 6 rectangular boxes, with three square buttons, one centered in the middle and one on each end. Belt proper may be made from glossy red ABS or a similar shiny material and must be 3 to 3.5" wide. Red canvas or similar heavy material may also be used. The drop boxes dangle from the sides of the plastic belt face via black straps and are aligned under the plastic tabs of the ammo belt. They may be red or black in color. 2 Link to comment
Rat[501st] Posted December 10, 2019 Author Share Posted December 10, 2019 5 minutes ago, Blackwatch said: Rat I went back to the original (red) magma trooper CRL and it says red duck cloth. I have to imaging you are goign to need to dye or paint it, but check the other WIPs here to see what they did. Per the original CRL you can use red canvas. Canvas and duck cloth are SIMILAR but not quite the same. That may be a GML call. Belt Belt face is made of plastic (ammo belt). It is comprised of 6 rectangular boxes, with three square buttons, one centered in the middle and one on each end. Belt proper may be made from glossy red ABS or a similar shiny material and must be 3 to 3.5" wide. Red canvas or similar heavy material may also be used. The drop boxes dangle from the sides of the plastic belt face via black straps and are aligned under the plastic tabs of the ammo belt. They may be red or black in color. Thanks David. I'll have to ask my GML see what he says. I may end up having to order one, but I like the idea of making my own. 1 Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now