RAIDER

Post-CRL review, updated reference pictures from other proposal thread and discussions.

@Toda Awesome! These guys have worked hard to comb through the details of our references to get this right. Anxiously awaiting that pack to finish it up!

THANK YOU! We had several submissions for both grenade and medic bicep. With this, all pics are in and accounted for. LMOs have been contacted and we wait. Thank you again to all prospective builders for their patience and the amazing input given by all who participated in the drafting of this proposal. P.S. Standard bicep color confirmed as Montana Yellow Cab. CRL adjusted to reflect this but still reads as "or comparable color" to allow for similar options.

We have all pictures edited and ready to submit EXCEPT the following: medic bicep grenade Currently exploring options for these pieces but if anyone has them on hand to photo, we could use them asap. Spread the word and have people contact me. THANKS!

Edits made to telemetry unit color and medic stripe markings color. Adjustments made to Level 2. Moved respirator hex screw to (again, after further discussion) and belt loop drop down to Level 2. We have found a suitable CRL model. Pictures are currently being submitted and edited for final submission to LMOs.

Very nice. Interesting...this would require a new CRL entirely. @Blackwatch @izzi @Scubacat We may need to make sure our reference photos and what not are up to date and sufficient for building the CRL. Following your thread man. As detailed of a build as you can provide in here the better. Good luck!

Edits made to telemetry unit color and medic stripe markings color.

@Blackwatch none yet on my end.

Draft has been reviewed in its entirety line by line. Additional edits made to cleanup text, descriptions, order. Change made to helmet flashlight (level 2). Reviewing current draft in comparison to original applicant's armor. Please standby for picture requests of armor pieces that will be needed.

Hopefully soon! Congrats on the weight loss. Give me your secrets lol! But yes...keep keeping us updated.

Looking good man. Im anxious to see that pack w the whole suit. Which config are you looking to do? Sent from my iPhone using Tapatalk

3D Printed??? I need to get one lol.

If the armor setup itself is vastly different, then I would be of the mind to not include the weapon.

Hey Stormsy. Until the CRL is official and complete we (at least as a staff) arent in a position to say whether something will be acceptable or not unfortunately. I hope you understand. That said, I would highly encourage you to start a separate thread in the Imperial Army section and get some potential feedback and input there. Sorry I cant be more helpful at the moment until the CRL is finished here in this thread. Sent from my iPhone using Tapatalk

I totally understand lol. Sure do that. Like I said, him carrying the blaster around and then raging out w it on the battlefield is evidence that Imperial Mudtroopers did have them issued (I suppose). I buy it. Ultimately, Im not the one who has to be convinced. I can see counter arguments to it popping up. Was he not a “standard” MT? Did his gear/armor differ significantly enough that he could be considered a different type of trooper other than “standard”? Sent from my iPhone using Tapatalk

My word isnt gospel on this but the precedent has clearly been that those characters who aren’t truly Imperials and are just in Imperial costume (disguise) dont become CRLs. Jyn, Finn, Storm Han/Luke the biggest examples. Another lesser known lesser screen time example would be flipped up mask bearded biker scout (Nik Sant or...Captain Rex lol). So I would say doubtful a separate specific CRL is accepted. However, if the gun was on the field and used by a guy posing as a Mudtrooper...then I would say you could at least make a case to include the blaster as an optional accessory. It was clearly a weapon that was acceptable for Mudtroopers to use (albeit our evidence is a fake Mudtrooper). Sent from my iPhone using Tapatalk

id prefer that as Level 2 if everyone is ok w that Sent from my iPhone using Tapatalk

Can make those minor edits later. I am in contact w/ @Morizhara (Stephanie) to check her and squadmates' @darthcashman ability to update to CRL draft. Should have that sorted in a day or 2 so we can decide the next step forward. Thanks for everyone's contributions to this point and patience.

Currently, no.

Edits reviewed. Tidied up just a couple other minor typos as well. At this point (unless there is any other info or feedback to be added), we are at a holding phase until we can provide pictures for the CRL reference images and CRL model.

Edits made to grenade location/strap, TU alignment, and E-11 flashlight location. @areilly Can you clarify what you're saying regarding the patch? We currently have the patch w/ no mention of material for Level 1 and PVC as the stated material for Level 2. Lastly, in case I don't hear back from @darthcashman regarding being the CRL model, do we have (or know of) anyone else that can step up to provide the pics? We are at a point where that will stall out progress until we can submit pics w/ this proposal to the LMOs.

I would change this to “aligned with the rim” - the bottom edge appears to be right on or very slightly below the top of the rim. “Features a beige or red square” - Han is seen with a red one “Imperial cog patches are textured vinyl material” - the Anovos ones are labeled as vinyl, and mentioning texture to differentiate between the flat printed vinyl patches used on some of the OT uniforms. an addition to the grenade section to mention the attachment location and strap: ”Grenade is attached via a strap looped through or attached to the right shoulder buckle. Strap is attached to either side of the grenade’s center greeblie with loops around the shaft of the grenade and closed with snap buttons.” Next two in the E-10 section Change to left side I’m not seeing the central cylinders in any of the images, just the outer two with one off center pin in the middle area, so leave off the 2 smaller central cylinder. Thanks. I will adjust tomorrow. Only adjust we will not do is the Han specific red square. This CRL will be for standard MTs as “Hero” characters are not typically admitted into the Legion (ie Stormtrooper Han). Sent from my iPhone using Tapatalk

I forgot to mention...in order to finish our submission to the LMOs we will need to include photos. I would like to extend to @darthcashman , as he provided the initial write-up proposal, the opportunity to model the Mud Trooper for the CRL provided the parts of the costume can meet the final CRL submission. @Morizhara if you read this prior to him, could you please pass word. I will send a PM as well. Since we would like to get this done sooner than later, if he is unable to provide the photos, we would be happy to open the opportunity up to someone who can provide the pictures matching the CRL accurately. Almost there folks!

I read it through 2 more times and made some minor edits...nothing major. I also did some rearranging of the items to something that makes more sense in terms of progression. I would like to see a couple more people read it through if possible. THANKS!!!

@Blackwatch Sorry to confuse. I was asking if the tab read "Sapper" in the comic panels themselves.